Phaser® 6250 Color Laser Printer Copyright © 2003 Xerox Corporation. All Rights Reserved. E-1 Manufacturer: Xerox Corporation, Office Group P. O. Box 1000, Wilsonville, Oregon, 97070-1000 Preparation Date: May 6, 2003 Material Safety Data Sheet Phaser® 6250 Color Laser Printer E-2 Section 1–Product Identification Product Use: Phaser 6250 Color Laser Printer Section 2–Information Ingredients Section 3–Hazards Identification Routes of Exposure: Toner and developer powders are encased in a cartridge. Minimal exposure through inhalation or skin contact is expected when used as intended. Potential Health Effects: Health effects from this product are expected to be negligible, when product is used as intended. See Section 11, Toxicology Information. Immediate Effects: Inhalation: Minimal irritation to respiratory tract, as for any non-toxic dust Skin: Not expected to cause skin irritation Eye: Not expected to cause eye irritation Ingestion: Not an expected route of exposure Chronic Effects: None known Signs and Symptoms of Exposure: Minor irritation to respiratory tract. Medical Conditions Aggravated by Exposure: None known. Section 4–First Aid Measures Inhalation: Remove person to fresh air. Seek medical attention if symptoms occur. Product Names Part Numbers Black Toner Cartridge 106R00671, 106R00675 Cyan Toner Cartridge 106R00668, 106R00672 Magenta Toner Cartridge 106R00669, 106R00673 Yellow Toner Cartridge 106R00670, 106R00674 Imaging Unit, contains Developer 108R00591 Ingredients (percent by weight) CAS number Toner: Polyester resins (70-90%) Trade Secret Carbon black or non-hazardous color pigments (<10%) carbon black: 1333-86-4 Paraffin and vegetable waxes (<15%) Trade secret Amorphous silicas (<8%) Trade secret Developer: Frits, chemicals (>90%) Trade secret Toner (>10%) Trade secret Phaser® 6250 Color Laser Printer E-3 Eyes: If particles get into eye, flush thoroughly with water. Seek medical attention if symptoms occur. Skin: Wash thoroughly with soap and water. Seek medical attention if symptoms occur. Ingestion: Dilute stomach contents with several glasses of water. Seek medical attention if symptoms occur. Section 5–Fire Fighting Measures Flash Point: Not applicable Fire and Explosion Hazards: Toner is a combustible powder. Like most organic powders, it can form explosive mixtures when dispersed in air. Extinguishing Methods: Water, dry chemical, carbon dioxide, or foam. Fire Fighting Information: Avoid inhalation of smoke. As for any fire, wear protective clothing and self-contained breathing apparatus. Section 6–Accidental Release Measures Spill or leak: Sweep up or vacuum spilled materials and carefully transfer into sealable waste container. Sweep slowly to minimize generation of dust during clean up. If a vacuum is used, the motor must be rated as dust tight. A conductive hose bonded to the machine should be used to reduce static buildup. Clean up residue if necessary with soap and cold water. Wash or dry clean garments after removing loose toner. Section 7–Handling and Storage Handling: No special precautions, when used as intended. Storage: Avoid high temperatures. Section 8–Exposure Control - Personal Protection No special personal protection indicated, when used as intended in Xerox Phaser color printers. Threshold Limit Value (TLV): 10 mg/m3 (total dust) Permissible Exposure Limit (PEL): 15 mg/m3 (total dust); 5 mg/m3 (respirable dust) Short Term Exposure Limit (STEL): None established Ceiling Limit: None established Xerox Exposure Limit (XEL): 2.5 mg/m3 (total dust); 0.4 mg/m3 (respirable dust) Section 9–Physical and Chemical Properties Appearance/Odor: Black, blue, red, or yellow powders/faint odor Boiling Point: Not applicable Phaser® 6250 Color Laser Printer E-4 Solubility in Water: Insoluble to negligible. Evaporation Rate: Not applicable Vapor Density (Air = 1): Not applicable Volatile (%): Not applicable Softensing Range: Not available Melting Point: Not available Specific Gravity (Water = 1): Not available Vapor Pressure (mm Hg): Not applicable pH: Not applicable Section 10–Stability and Reactivity Stability: Stable. Incompatibility with Other Materials: Strong oxidizers Hazardous Polymerization: Will not occur Hazardous Decomposition Products: During a fire, toxic gases may be generated by thermal decomposition or combustion. Section 11–Toxicological Information This material has been evaluated by Xerox Corporation. The toxicity data noted below is based on test results of the materials described herein or similar toners. Oral LD50: >5 g/kg (rats), practically non-toxic Dermal LD50: > 5 g/kg (rabbits), practically non-toxic Inhalation LC50: > 5 mg/l (rats; 4 hour exposure), practically non-toxic Eye Irritation: Not an irritant Skin sensitization: Not a sensitizer Skin irritation: Not an irritant Mutagenicity: No mutagenicity detected in Ames assay Carcinogens: None present Additional Information: The results obtained from a Xerox sponsored Chronic Toner Inhalation Study demonstrated no lung changes in rats for the lowest (1 mg/m3) exposure level (i.e., the level most relevant to potential human exposure). A very slight degree of fibrosis was noted in 25% of the animals at the middle (4 mg/m3) exposure level, while a slight degree of fibrosis was noted in all the animals at the highest (16 mg/m3) exposure level. The findings are attributed to "lung overloading," a generic response to excessive amounts of any dust retained in the lungs for a prolonged period. This study was conducted using a special test toner to Phaser® 6250 Color Laser Printer E-5 comply with EPA testing protocol. The test toner was ten times more respirable than commercially available Xerox toner and would not be functionally suitable for Xerox equipment. Section 12–Ecological Information Not available Section 13–Disposal Consideration These materials are not RCRA hazardous wastes as specified in 40 CFR 261. State and local waste disposal requirements, however, may be more restrictive. Dispose in accordance with all federal, state, and local regulations. Incinerate only in a closed container. Section 14–Transport Information DOT: Not regulated Section 15–Regulatory Information TSCA: All components of these toners have been manufactured in compliance with TSCA. CANADIAN WHMIS: These toners are not regulated as controlled products under the Workplace Hazardous Material Information System (WHMIS). Section 16–Other Information NFPA 704: Health–0, Fire–1, Reactivity–0 (All colors) Original preparation date: 05/06/2003 Xerox Corporation Office Group Environmental, Health & Safety P.O. Box 1000 Mail Stop 60-512 Wilsonville, Oregon 97070 Safety Information: 800-828-6571 Health Emergency: 585-422-2177 Transportation Emergency (Chemtrec): 800-424-9300